Product name: PVC composite duct

Product material: PVC inner aluminum foil material, with steel wire.

Application: Suitable for medium and low pressure central air conditioning and ventilation systems.

Product features: This product is made of PVC film wound on steel wire, and anti-corrosion touch is applied inside. Suitable temperature: 0℃-80℃, maximum air flow rate: 30m/s, maximum working pressure: 2500Pa, the product is suitable for exhaust systems containing corrosive gases such as acid and alkali.

Advantages: The product is light in weight, does not need to be an angle steel hanger, and has high strength; it can be bent at will, there is no rigid elbow, which can reduce wind resistance; integrated molding, small air leakage; can acid and alkali and other corrosive gases, and is not easy to age. It can be stretched and bent at will, anti-static, resistant to chemical exhaust gas, flame retardant, abrasion resistant, convenient and flexible to install, and is used for ventilation systems such as ventilating fans and range hoods.

Product use: all kinds of mechanical equipment (dryer, oven, injection molding machine, high-temperature ironing), plant, automobile exhaust, bathroom, electronics factory, sewer, shipyard, refrigeration, environmental protection, extraction of smoke, moisture, dust, High temperature gas powder extraction, ventilation, etc.

Features:

1. Used for ventilation and exhaust of bathroom, dryer, range hood, fireplace, etc.

2. Highly resistant to corrosion and microorganisms

3. It has a certain degree of flexibility, which makes it easy to connect to any desired installation location, especially in the installation of prefabricated pipes, which shows that it cannot achieve bending sensitivity with other pipes.

4. The errors between system components can be corrected quickly and economically

5. Low friction loss, if installed correctly, there will be no air leakage.

6. Low-cost shipping and storage fees.

Installation method:

The first step: put the clamp on the pipe for use (air conditioning cable ties can also be used)

Step 2: Tear the aluminum foil tube wire one or two times

Step 3: The torn steel wire is wound on the outer ring of the air outlet of the check valve and fixed with aluminum foil tape

Step 4: Use a whole strip of aluminum foil tape or waterproof tape to stick a few turns (remember to tear the place and stick it well to prevent air leakage)

Step 5: Fix the clamp sleeve (or air-conditioning cable tie) at the air outlet.